異形鋁單板的表面處理步驟有哪些，異形鋁單板的加工工藝比較復雜，很多人對異形鋁單板的加工步驟不清楚，在加工前先對異形鋁單板進行一系列的加工。進入產品。加工，首先是表面處理，表面處理非常簡單，其實很重要，對于下一道工序來說非常關鍵，所以。表面處理是必不可少的。主要的表面處理，宏鋁鋁單板制造商分為七個步驟：

1。第一步是用水沖洗并除去彎曲的鋁單板基板上的所有灰塵。

2。第二步是用堿性水再次清洗基材。為什么要用堿性水？該堿性材料能有效地溶解彎曲鋁單板基板上的各種污漬和污漬。

3。第三步是用干凈的水清洗殘留的堿性物質，為下一步做準備。

4。第四步使用酸性溶液再次清潔襯底。目的是清潔與酸性溶液化學反應的底物表面的殘留物。

5。第五步是用干凈的水再次清洗襯底。

6。第六步是對基底進行鉻處理。

7。第七步是用水對最終的鍍鉻基板進行清洗。

What are the steps in the surface treatment of the profiled aluminum veneer, the processing technology of the profiled aluminum veneer is more complicated, so many people are not clear about its processing steps, and the profiled aluminum veneer will first do a series of processing before processing into a product. Processing, the first is surface treatment, surface treatment is very simple, in fact, very important, is very critical for the next process, so. Surface treatment is essential. The main surface treatment, the macro aluminum and aluminum veneer manufacturers divide it into seven steps:

1. The first step is to rinse with water and remove all the dust from the curved aluminum veneer substrate.

2. The second step is to clean the substrate again with alkaline water. Why use alkaline water? The alkaline material can effectively dissolve various stains and stains on the curved aluminum veneer substrate.

3. The third step is to clean the residual alkaline material with clean water to prepare for the next step.

4. The fourth step uses an acidic solution to clean the substrate again. The purpose is to clean the residue on the surface of the substrate that chemically reacts with the acidic solution.

5. The fifth step is to clean the substrate again with clean water.

6. The sixth step is to chrome the substrate.

7. The seventh step is to perform final cleaning of the chromed substrate with water.